How Can I Operate the R-Box Pearl Behind a Proxy Server?

The R-Box Pearl software (and hardware) can operate behind a proxy server with a few simple network configuration adjustments.

• Configure Proxy Settings in your operating system:
  
       Microsoft Windows - Open the Windows Control Panel and launch the Java app and go into network settings.    
         There, configure both the IP number and Port number for your proxy server and save the settings.
  
       R-Box Pearl player device - Click on Settings, then Network, then Ethernet, then Advanced Options, then Proxy settings,
         then Manual, and then enter either the hostname or IP number of the proxy server, continue, then enter the Proxy port
         number (e.g. 8080 or whatever) and continue.  Leave the "Bypass proxy for" field blank, or enter any domain names you
         need to connect to directly rather than via the proxy server.
  
  
• Configure Proxy Settings in R-Box Pearl software - Proceed into the Settings options for the R-Box Pearl software and configure
  the hostname or IP number for your proxy server, as well as the port number, and save the settings.
  
  
• For your network firewall (if any), make sure outbound port 80 and port 443 are enabled for the proxy server to connect to the
  domain name where RadioSparx is hosted (i.e. www.radiosparx.com), or if configuring by IP number, open it to 66.129.125.5.